This Enerdrive B-Tec Slimline Lithium Battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.

It also incorporates wireless Battery Monitoring Technology. By downloading the Androidâ„¢ or Apple ® app to your smartphone or tablet device, you can monitor the following information; Battery Capacity, Battery Voltage, Battery Current (Amps), Battery State of Charge (SOC), Battery State of Health (SOH), Battery Status, Individual Cell Voltage, Battery Temperature, Battery Cycles, Battery Alarms, and Battery Event Information

The Enerdrive B-Tec Slimline Lithium Battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.

The Enerdrive B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.

The Enerdrive B-TEC Slimline battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.

WARNING: Please note B-TEC batteries must not be installed:

• In vehicle engine bays or in high heat environments, refer to Section 10 – Battery Specifications of the manual.

• In wet areas such as caravan chassis mounts, open ute trays or boat deck areas.

• Inside compartments dedicated to carrying gas.​​

Specifications include: Normal Charge Voltage CV/CC*: 14.20 Ì´ 14.60V, Standby (Float) Voltage: 13.50 Ì´ 13.80V, Maximum Charge Current: 80A @ 25 °C for 30mins, Maximum Discharge Current: 100A@25 °C ± 5 °C for 30mins, Dimensions: 109(w) x 551(l) x 239(h)mm, Weight: Approx. 12.5kg
For more Benefits & Features, please click the 'Features' tab